1/10 TRF104 2WD Formula-1 Chassis Kit

1/10 TRF104 2WD Formula-1 Chassis Kit Overview

This hi-spec 2WD formula chassis, built around carbon fiber and aluminum chassis components, with the front lower arms crafted from carbon fiber plate, makes it a formidable opponent on the racetrack! Furthermore, the chassis features updated front and rear suspension, plus an updated R/C equipment layout which is compatible with Li-Po batteries.

• Full Ball Bearings
• Square-Shaped Battery Holder
• Laid Down Steering Servo Position
• Camber Angle Is Freely Adjustable
• Caster Angle Is Also Adjustable

1/10 TRF104 2WD Formula-1 Chassis Kit Features

• Features plastic upper A-arms
• Camber angle is adjustable freely from +1 to -3 degrees (approximate) using a 2mm hex wrench
• Caster angle is also adjustable at 6, 9 and 12 degrees
• Ball connectors are equipped at motor mount front and rear, and suspension roll is placed at the center of the chassis
• The model centering is controlled by roll springs under the rear shaft, and friction grease on roll dampers at motor mount allow adjustment of roll speed
• The pitching is controlled by FRP suspension plate flex and a TRF damper
• Battery pack, receiver and servo are positioned at the center of chassis to ensure better rear grip
• A square-shaped battery holder is included, for Li-Po battery packs to comply with U.S. open-class regulations
• 5 types of ground clearances are adjustable in 0.8mm steps and two wheelbases can be chosen with a difference of 2.5mm
• The laid down steering servo is positioned about 30mm backwards compared to the TRF103 chassis and ensures a low center of gravity
• Features a choice of 4 types of steering linkage adjustments over a range of about 1.8mm length by changing Ackerman plate position to keep direct steering
• Lightweight and durable carbon fiber shaft limits weight and ensures compatibility with rubber tires which are relatively heavy
• The rear wing is connected to the motor mount, and it moves along with rear suspension
• 2.5mm thick carbon fiber front lower suspension arms have two attachment positions to adjust its width and attach wheels with different offsets

1/10 TRF104 2WD Formula-1 Chassis Kit Product Specifications

• Ball BearingsFull Ball Bearings
• BatterySold Separately
• BodySold Separately
• ChargerSold Separately
• ChassisCarbon Fiber Chassis
• Completion LevelKit
• DifferentialPressure Plate Ball Differential
• Drive TypeForward/Brake/Reverse
• Drivetrain2WD
• Gear RatioAdjustable
• Ground ClearanceAdjustable
• Manufacturer #42389
• Motor Size540
• Power TypeElectric
• Product Height1.83" (46 mm)
• Product Length12.79" (325 mm)
• Product Width6.65" (169 mm)
• RadioSold Separately
• ReceiverSold Separately
• Scale1/10
• ServosSold Separately
• Shock TypeOil Shocks
• Speed ControlSold Separately
• SuspensionCVA Oil Filled Rear Mono Shock/Coil Spring Front Suspension
• Vehicle SizeStandard
• Vehicle TypeOn-Road